
       ͻ
              These Paradise drivers must be installed from        
                          the A: floppy drive                      
       ͼ


       ͻ
           The following instructions describe how to install one  
              of the VGA extended video drivers for Windows 3.1    
       ͼ


step 1 - You MUST have already installed Windows 3.1 on your system, however
         you do NOT have to reinstall Windows 3.1 again to change the driver.

step 2 - Go to the directory where you have installed Windows 3.1.

step 3 - Type 'setup' and press ENTER.

step 4 - Select the 'Display:' option from the System Information list using
         the UP and DOWN ARROW key and press ENTER.

step 5 - Scroll to the bottom of the list displayed using the DOWN ARROW key.

step 6 - Select 'Other' in the list and press ENTER. You will then be asked
         to insert the hardware manufacturer's display driver disk.

step 7 - Put the VGA display driver disk in the A: drive. Type in 'A:\' if
         the default path shown is wrong.

step 8 - Select the desired driver from the list defined on the disk and
         press ENTER. You may be asked to insert the "VGA display driver
	 disk" again. If so, again type in the correct pathname (i.e. 'A:\')
         and press ENTER. When the driver has been configured you will
         return to the original configuration screen.
 
step 9 - Choose 'Accept configuration shown above' and press ENTER to execute
         the 'Complete Changes' process. Windows will return to DOS when the
         configuration has been completed.

========================== Installation Complete ============================

NOTE:
    1 - You can NOT run the 'Setup' (icon) within Windows itself.


    2 - When installing Windows for the first time and electing to select
        one of the drivers provided on the VGA display driver disk; Windows
        setup program at some time will prompt you with the following
        message:
                Setup needs the following disk
	without giving the name of the disk. It is in fact requesting the
        VGA display driver disk. So, put the VGA driver display disk in
        the A: drive, type 'A:\' and press ENTER.


    3 - An 800x600x16 color driver is supplied in Windows 3.1.  The driver 
        is called "Super VGA (800x600, 16 colors)".
