STB Windows Display Driver Disk
------------------------------
Please read any additional installation documentation provided.

To install the STB drivers into Windows 3.1:

1)  Exit Windows.

2)  Change directory (CD) to your Windows directory.

3)  Type "setup" at the MS-DOS prompt.

4)  Select Display - "Other (Requires disk provided by a hardware manufacturer)"

5)  If you are installing the drivers into Windows 3.1, enter the path to the 
    STB Windows Driver disk, e.g. "A:\" if this diskette is in the A: drive.

6)  Select the desired screen resolution and press Enter.
    Setup will copy files from the diskette into your Windows directories.
  ***** Setup may ask you to insert another diskette.  If so, insert the ****
  * STB Utility/Driver disk and change the directory to "A:\SUPPORT.WIN" if *
  * this diskette is in the A: drive.                                       *
  ***************************************************************************

7)  When Setup is complete, you are returned to the MS-DOS prompt.
    Type "win" to start Windows.
=================================================================
For a more flexible installation of the Windows drivers, use the
WINSTALL SETUP.EXE utility described on page 4-4 of the manual.
=================================================================
                                      December 30, 1994
                                      T. Feaster, STB Compatibility
