               SIS IDE Driver Installation For Windows NT
              =============================================
^NOTICE
   If your Microsoft NT is installed from floppy, please start SiS IDE Driver
   installation from step (01).
   If your Microsoft NT is installed from CD-ROM, please start SiS IDE Driver
   installation from step (04).
01) From the "Main" Group in "Program Manager", start "^Control Panel".
02) From the "Control Panel", choose "^Devices".
03) Change the "^Scsidisk" device's startup setting from "disable" to "boot".
.............................................................................
04) From the Options menu in "^Windows NT setup", choose
    "^Add/Remove SCSI Adapters.
05) In the SCSI Adapter Setup dialog box, choose the "^Add" button
06) In the "^Adapter:" list dialog box, choose
    "^Other (Requires a disk from a hardware manufacturer)"
07) Next, you will see the "^Insert Diskette" dialog box,
    insert the SIS driver disk into Drive A: and change path to
           "NT31" (for Windows NT Ver 3.1) or
           "NT35" (for Windows NT Ver 3.5) in dialog box.
08) Next, In "Select OEM Option" dialog box, choose
    "^SIS 32-Bit Local Bus IDE Adapter" and click "^OK."
09) In the "^Select SCSI Adapter Option" dialogbox, click on
    the "^Install" button in the dialog box.
10) Installation is successful if the "^SCSI Adapter Setup" dialog box
    reappear, and "^SIS 32-Bit Local Bus IDE Adapter" will be listed as
    an installed driver.
11) Reboot your system.
