README.TXT
==========

1. INTRODUCTION
	The diskette contains the following files in order to install and 
	un-install VL-IDE DOS and Windows 3.1 Drivers:

	File Name               Purpose
	========                =======
	README.TXT              Introduction notes and installation guides.
	INSTALL.EXE             Install DOS and Windows 3.1 Drivers. 
	UNINSTALL.EXE           Remove installed DOS and Windows 3.1 Drivers.  
	VLIDE.SYS               VL-IDE DOS Driver.
	VXIDE310.386            VL-IDE Windows 3.1 Driver.


2. INSTALLATION GUIDE
	There two options, express and  custom, are provide by the 
	installation program.  
	
	2.1 Express (Recommended) <Press E>
		If your CONFIG.SYS is put in C:\ and MS-Windows directory 
		is put in C:\WINDOWS\, your are recommended to follow the 
		express option. The express option will automatically  
		create and update files that need to install DOS and 
		Windows 3.1 Drivers. Baiscally, No user intervation is 
		required if no errors. When errors encounter, beep sounds 
		will notice user . Follow the instructions as shown on the 
		status bar.

	2.2. Custom <Press C>            
		If your computer is not booting from C:\ or MS-Windows 
		directory is not put in C:\WINDOWS\, you can select the 
		custom option to decide the path for installing DOS and 
		Windows 3.1 Drivers. Instructions will be prompted on the 
		status bar. Please follow the instructions. The custom 
		option allow you to install DOS or Windows 3.1 Drivers on 
		the path you want. When errors ocurr, beep sound will notice 
		user. Follow the instructions as shown on the status bar.  

3. UN-INSTALLATION GUIDE

	3.1. Uninstall DOS Driver 
		Follow the instruction and type correct path of installed DOS
		Driver path. The program will uninstall DOS Driver and update
		the corresponding files.
	3.2. Uninstall Windows 3.1 Dirver
		Similar procedure as uninstall DOS Driver that Only correct 
		installed Windows 3.1 Driver path is required.


