README95.TXT - IGA1680 Windows 95 Drivers Note.

0.Installation.
  - Installation program works only in VGA mode.
         If users are using old driver utility, should use old IGSTOOLS
         Set Resolution utility to switch mode back to 640x480x4.
  - From Start button, choose RUN, and then type A:\SETUP95
  - Driver and utility will be automatically installed to WINDOWS,
         and the current resolution setting will be 640x480x256.
  - Files for Windows 95:
         + README95.TXT      : this file, will be posted on screen when
                               user run SETUP95.
         + SETUPWIN.EXE      : setup file.
         + FILES95.TXT       : Windows 95's list file.
         + IGA.VXD           : Driver file.
         + IGA1680.DRV       : Driver file.
         + IGA1680.INF       : INF file.

1.Version
  Windows Drivers version 1.10.

2.Settings.
  o. Refresh rate.
     To set to higher refresh rate, User can use IGSTools.

  o. Software cursor.
     To use software cursor, or override default setting, user can add
     following line to SYSTEM.INI, section DISPLAY

         [DISPLAY]
         swcursor=0/1           1 if enable software cursor.

  o. Linear Addressing.
     To use VFLAT selector, user can disable Linear Address by adding
     following line to SYSTEM.INI, section DISPLAY

          [DISPLAY]
          LinearEnable=0/1      0 if disable Linear Address.


3.Some important information.
  a.Company Information.
         Name
         Address
         City                    State

  b.Tech-Support information.
         Tech-Support:
         BBS         :
         Time        :

