             Procomp PM-S240 AUDIO DEVICE CONFIGURATION HELP MENU

COMBO BOX FUNCTION AND HARDWARE CONFIGURATION DESCRIPTIONS

    -----------------
    Sound Blaster Pro (for SB Pro Mode Only)
    -----------------

    I/O Port        SB Pro I/O Port selections:
                      *220, 240
    IRQ             SB Pro Interrpt Address selections:
                      *5, 7, 10
    DMA             SB Pro DMA Channel selections:
                      *1, 0, 3

    Note: 8-bit Sound Test in the Sound Test Window can be used to 
          test Sound Blaster Pro Mode regardless of what the Current 
          Mode setting is.

    --------------------
    Windows Sound System (for WSS Mode Only)
    --------------------

    I/O Port        WSS I/O Port selections:
                      *530, E80, F40, 604
    IRQ             WSS Interrpt Address selections:
                      *7 ,11, 9, 10, 5
    DMA             WSS DMA Channel selections:
                      *0, 1, 3, 0/1, 1/0, 3/0 

    There are 2 modes for DMA selections:

    [Single DMA]: uses a single DMA channel 
                  for DMA playback and capture.

    [Dual DMA]:   Allows to playback and record
                  at the same time.
                  0/1, 1/0, 3/0 are the Dual DMA 
                  selections. The first one is
                  for Playback. 2nd: recording.

    Note: 16-bit Sound Test in the Sound Test Window can be used to 
          test Windows Sound System Mode regardless of what the 
          Current Mode setting is. 

    ----------------
    MPU401 Interface
    ----------------

    MPU401 is the industrial standard interface
    for MIDI (Music) devices such as keyboards
    and some Wave Table Synthesizer devices.

    Interface       External MIDI enable or disable selections:
                      *OFF,ON
    I/O Port        External MIDI I/O Port selections:
                      *330, 300, 320
    IRQ             External MIDI Interrupt Address selections:
                      *9, 5, 7

    ----------------
    CD-ROM Interface
    ----------------

    Your sound card also could be used as a
    CD-ROM interface card to hook up to SONY,
    MITSUMI, PANASONIC and IDE compatible 
    CD-ROM drives.

    CD Type         CD-ROM selected drive type.
                    *NONE or CD-ROM drive types...
    I/O Port        ** CD-ROM selected I/O port.
    IRQ             ** CD-ROM selected Interrupt Address.
    DMA             ** CD-ROM selected DMA Channel.
    CHANGE OPTIONS  Brings up CD-ROM configuration menu.       
