
MouseSuite README File
IBM ScrollPoint III/Pro/Optical Mouse Driver for Windows 95/98/NT4/ME


(c) Copyright Primax Electronics Ltd, 1998-2001. All Rights Reserved.


TABLE OF CONTENTS
=================
1. Before Installation
2. Installation Guide
3. Uninstallation



1. Before Installation
-----------------------
   If you have installed special mouse drivers or mouse software on your
   system, other than the Standard PS/2 Port Mouse, Microsoft PS/2 Port Mouse,
   or IBM PS/2 TrackPoint drivers, please uninstall them before installing the
   ScrollPoint III/Pro/Optical mouse drivers.

   Note: If your mouse interface is USB, you will need Windows 98/ME/2000/XP. There is
         no USB support in Windows NT 4.0 or Windows 95.

2. Installation Guide
----------------------
   Running setup.exe on this diskette is the fastest way to install this software.

   For unattended installation, you can use parameter /S for silence install
   and /NR to specify no reboot. For example:
   
     setup /s          (silent installation, will reboot)
     setup /s /nr      (silent installation, will NOT reboot)
     setup /s /TYPE:PS2   (PS/2 Mouse Preload installation)
     setup /s /TYPE:USB   (USB Mouse Preload installation)

   You may install the mouse driver manually as follows:

   - Windows 95 and Windows NT 4.0 [PS/2]
      1. Click on "Start " button and point "Settings".
      2. Click on "Control Panel".
      3. Double click on "Mouse" icon and display "Mouse Properties".
      4. Double click on "General" Tab in the "Mouse Properties" dialog box.
      5. Click on "Change..." button and display "Select Device".
      6. Click on "Have Disk..." button and display "Install From Disk".
         Insert this disk and change "Copy manufacturer's files from" to
  	     to this directory (eg: "A:\") and then click "OK" button.
      7. Click on "OK" button after displaying "Select Device" with the
         supported items and selecting the appropriate one.
      8. "Mouse Properties" will be displayed and you can certify the name
  	     which you choose.
      9. Use Keyboard from now on. Highlight "Close" button by "Tab" key
  	     and press "Enter" key. (There might be the case to take some time
	     to be displayed "Close" button.)
     10. Restart the Windows. (Remember to take this disk out and connect
  	     the mouse to your system before restart.)

   - Windows 98/ME [PS/2]
      1. Click on "Start " button and point "Settings".
      2. Click on "Control Panel".
      3. Double click on "System" icon and display "System Properties".
      4. In the "Device Manager" tab, double click on the mouse icon
         in the device list.
      5. Select the PS/2 pointing device under mouse and click the
         "Properties" button.
      6. A property page about this mouse will appear, select the
         "Driver" tab and then click the "Update Driver..." button.
      7. Follow the instruction on the screen to complete the
         driver update procedure.

   - Windows 98/ME [USB]
      1. Click on "Start " button and point "Settings".
      2. Click on "Control Panel".
      3. Double click on "System" icon and display "System Properties".
      4. In the "Device Manager" tab, double click on the "Human Interface 
         Devices" icon in the device list.
      5. Select the proper "USB Human Interface Device" and click the
         "Properties" button.
      6. A property page about this device will appear, select the
         "Driver" tab and then click the "Update Driver..." button.
      7. Follow the instruction on the screen to complete the
         driver update procedure.


3. Uninstallation
------------------
   - Windows 95/98/ME & Windows NT 4.0
      1. In Control Panel, open "Add/Remove Programs".
      2. In Install/Uninstall tab, select this software from the list and
         click on the "Add/Remove" button.
      3. Follow the instruction on the screen to complete the
         uninstallation procedure.





