ENCACHE  Version 1.0  __  IDE Drive Utility
Copyright 1995 Quantum Corporation -- All Rights Reserved

This program allows you to view or toggle WCE (Write Cache
Enable), CE (Read Cache Enable) or PE (Prefetch Enable) configuration
bits setup on Quantum Fireball and Trailblazer IDE Drives. The low level
device driver ATATSR.COM must be loaded in memory before you proceed
further.

usage:  ENCACHE [options]
Where options are one or more of the following:

  /d0        Select Drive 0.
  /d1        Select Drive 1.
  /view      View all of bit(s) current setting only.
  /on        Enable selected configuration bit(s).
  /off       Disable selected configuration bit(s).
  /PE        Select Prefetch Enable bit (bit 1 of byte 32).
  /CE        Select Read Cache Enable bit (bit 0 of byte 32).
  /WCE       Select Write Cache Enable bit (bit 2 of byte 39).


Note:
	1. Disabling read cache (CE bit) will disable prefetch (PE bit) also.
	2. ATATSR.COM can be loaded by just executing it at the command prompt.